From singing to musical scores: Estimating pitch with SPICE and Tensorflow Hub
جون 17, 2020
Posted by Luiz Gustavo Martins, Beat Gfeller and Christian Frank

Pitch is an attribute of musical tones (along with duration, intensity and timbre) that allows you to describe a note as “high” or “low”. Pitch is quantified by frequency, measured in Hertz (Hz), where one Hz corresponds to one cycle per second. The higher the frequency, the higher the note.

Pitch detection is an interesting challenge. Historically, for a machine to understand pitch, it would need to rely on complex hand-crafted signal-processing algorithms to measure the frequency of a note, in particular to separate the relevant frequency from background noise and backing instruments. Today, we can do that with machine learning, more specifically with the SPICE model (SPICE: Self-Supervised Pitch Estimation).

SPICE is a pretrained model that can recognize the fundamental pitch from mixed audio recordings (including noise and backing instruments). The model is also available to use on the web with TensorFlow.js and on mobile devices with TensorFlow Lite.

In this tutorial, we’ll walk you through using SPICE to extract the pitch from short musical clips. First we will load the audio file and process it. Then we will use machine learning to solve this problem (and you'll notice how easy it is with TensorFlow Hub). Finally, we will do some post-processing and some cool visualization. You can follow along with this Colab notebook.

Loading the audio file

The model expects raw audio samples as input. To help you with this, we've shown four methods you can use to import your input wav file to the colab:
  1. Record a short clip of yourself singing directly in Colab
  2. Upload a recording from your computer
  3. Download a file from your Google Drive
  4. Download a file from a URL
You can choose any one of these methods. Recording yourself singing directly in Colab is the easiest one to try, and the most fun.

Audio can be recorded in many formats (for example, you might record using an Android app, or on a desktop computer, or on the browser), converting your audio into the exact format the model expects can be challenging. To help you with that, there's a helper function convert_audio_for_model to convert your wav file to the correct format of one audio channel at 16khz sampling rate.

For the rest of this post, we will use this file:

Preparing the audio data

Now that we have loaded the audio, we can visualize it using a spectrogram, which shows frequencies over time. Here, we use a logarithmic frequency scale, to make the singing more clearly visible (note that this step is not required to run the model, it is just for visualization).
Note: this graph was created using Librosa lib. You can find more information here.
We need one last conversion. The input must be normalized to floats between -1 and 1. In a previous step we converted the audio to be in 16 bit format (using the helper function convert_audio_for_model). To normalize it, we just need to divide all the values by 216 or in our code, MAX_ABS_INT16:
audio_samples = audio_samples / float(MAX_ABS_INT16)

Executing the model

Loading a model from TensorFlow Hub is simple. You just use the load method with the model's URL.
model = hub.load("https://tfhub.dev/google/spice/2")
Note: An interesting detail here is that all the model urls from Hub can be used for download and also to read the documentation, so if you point your browser to that link, you can read documentation on how to use the model and learn more about how it was trained.

Now we can use the model loaded from TensorFlow Hub by passing our normalized audio samples:
output = model.signatures["serving_default"](tf.constant(audio_samples, tf.float32))

pitch_outputs = output["pitch"]
uncertainty_outputs = output["uncertainty"]
At this point we have the pitch estimation and the uncertainty (per pitch detected). Converting uncertainty to confidence (confidence_outputs = 1.0 - uncertainty_outputs ), we can get a good understanding of the results: As we can see, for some predictions (especially where no singing voice is present), the confidence is very low. Let's only keep the predictions with high confidence by removing the results where the confidence was below 0.9. To confirm that the model is working correctly, let's convert pitch from the [0.0, 1.0] range to absolute values in Hz. To do this conversion we can use the function present in the Colab notebook:
def output2hz(pitch_output):
  # Constants taken from https://tfhub.dev/google/spice/2
  PT_OFFSET = 25.58
  PT_SLOPE = 63.07
  FMIN = 10.0;
  BINS_PER_OCTAVE = 12.0;
  cqt_bin = pitch_output * PT_SLOPE + PT_OFFSET;
  return FMIN * 2.0 ** (1.0 * cqt_bin / BINS_PER_OCTAVE)

confident_pitch_values_hz = [ output2hz(p) for p in confident_pitch_outputs_y ]
If we plot these values over the spectrogram we can see how well the predictions match the dominant pitch, that can be seen as the stronger lines in the spectrogram: Success! We managed to extract the relevant pitch from the singer’s voice.

Note that for this particular example, a spectrogram-based heuristic for extracting pitch may have worked as well. In general, ML-based models perform better than hand-crafted signal processing methods in particular when background noise and backing instruments are present in the audio. For a comparison of SPICE with a spectrogram-based algorithm (SWIPE) see here.

Converting to musical notes

To make the pitch information more useful, we can also find the notes that each pitch represents. To do that we will apply some math to convert frequency to notes. One important observation is that, in contrast to the inferred pitch values, the converted notes are quantized as this conversion involves rounding (the function hz2offset in the notebook, uses some math for which you can find a good explanation here). In addition, we also need to group the predictions together in time, to obtain longer sustained notes instead of a sequence of equal ones. This temporal quantization is not easy, and our notebook just implements some heuristics which won’t produce perfect scores in general. It does work for sequences of notes with equal durations though, as in our example.

We start by adding rests (no singing intervals) based on the predictions that had low confidence. The next step is more challenging. When a person sings freely, the melody may have an offset to the absolute pitch values that notes can represent. Hence, to convert predictions to notes, one needs to correct for this possible offset.

After calculating the offsets and trying different speeds (how many predictions make an eighth) we end up with these rendered notes: We can also export the converted notes to a MIDI file using music21:
converted_audio_file_as_midi = converted_audio_file[:-4] + '.mid'
fp = sc.write('midi', fp=converted_audio_file_as_midi)

What's next?

With TensorFlow Hub you can easily find great models, like SPICE and many others, to help you solve your machine learning challenges. Keep exploring the model, play with the colab and maybe try building something similar to FreddieMeter, but with your favorite singer!

We are eager to know what you can come up with. Share your ideas with us on social media adding the #TFHub to your post.

Acknowledgements

This blog post is based on work by Beat Gfeller, Christian Frank, Dominik Roblek, Matt Sharifi, Marco Tagliasacchi and Mihajlo Velimirović on SPICE: Self-Supervised Pitch Estimation. Thanks also to Polong Lin for reviewing and suggesting great ideas and to Jaesung Chung for supporting the creation of the TF Lite version of the model.
Next post
From singing to musical scores: Estimating pitch with SPICE and Tensorflow Hub

Posted by Luiz Gustavo Martins, Beat Gfeller and Christian Frank

Pitch is an attribute of musical tones (along with duration, intensity and timbre) that allows you to describe a note as “high” or “low”. Pitch is quantified by frequency, measured in Hertz (Hz), where one Hz corresponds to one cycle per second. The higher the frequency, the higher the note.

Pitch detection is an interesting challen…